Accenture MDR Quick Start Guide for SonicWALL™ Security Appliance
This quick start guide will help Accenture MDR customers configure SonicWALL Security Appliance to send logs to the Log collection Platform (LCP).
The document includes the following topics:
Supported Versions
A list of supported versions is available in the Accenture MDR Supported Products List document (Accenture_MDR_Supported_Products_List.xlsx) which can be found in
Accenture MDR Portal - https://mss.accenture.com/PortalNextGen/Reports/Documents
Port Requirements
Table 1-1: Port requirements for LCP communication.
Source | Destination | Port | Description |
SonicWALL Security Appliance | LCP | 514 (UDP) | Default port |
Configuring SonicWALL Security Appliance
To configure SonicWALL Security Appliance to send syslog events to the LCP, follow the steps below.
Go to the Log > Syslog page.
Under Syslog Servers, click Add. The Add Syslog Server screen is displayed.
In the Name or IP Address field, enter the LCP host name or IP address. Then, messages from the Dell SonicWALL security appliance are sent to the servers.
If your syslog is not using the default port 514, enter the other port number in the Port Number field.
Click OK.
Click Accept to save all the Syslog Server settings.
Note: The collector supports only default Dell SonicWALL Syslog format.
LCP Configuration Parameters
Table 1-2: The SonicWALL Security Appliance event collector(Syslog-3291) properties to be configured by MDR are shown in the table.
Property | Default Value | Description |
Protocol | UDP | Default protocol for syslog events. TCP is not supported. |
IP Address | SonicWALL Security Appliance IP address | Logging device IP address mentioned in the Pre-Installation Questionnaire (PIQ). Note: If the device sends logs using multiple interfaces, contact the Accenture MDR onboarding team. |
Port Number | 514 | The default port for Syslog.
Note: The LCP can be configured to listen on a non-standard port, please advise the Accenture MDR onboarding team if this is a requirement. |
Legal Notice
Copyright © 2021 Accenture. All rights reserved.
Accenture, the Accenture Logo, and DeepSight Intelligence are trademarks or registered trademarks of Accenture in the U.S. and other countries. Other names may be trademarks of their respective owners.
The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Accenture and its licensors, if any.
THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. ACCENTURE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.
The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12.212 and subject to restricted rights as defined in FAR Section 52.227-19 "Commercial Computer Software - Restricted Rights" and DFARS 227.7202, et seq. "Commercial Computer Software and Commercial Computer Software Documentation," as applicable, and any successor regulations, whether delivered by Accenture as on premises or hosted services. Any use, modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government shall be solely in accordance with the terms of this Agreement.