Accenture MDR Quick Start Guide for VeloCloud SD-WAN
- KS
This quick start guide will help Accenture MDR customers configure VeloCloud SD-WAN to send logs to the Log collection Platform (LCP).
The document includes the following topics:
Supported Versions
A list of supported versions is available in the Accenture MDR Supported Products List document (Accenture_MDR_Supported_Products_List.xlsx) which can be found at Accenture Portal - https://mss.accenture.com/PortalNextGen/Reports/Documents
Port Requirements
Table 1-1: Port requirements for LCP communication.
Source | Destination | Port | Description |
VeloCloud SD-WAN | LCP | 514 (UDP) or 601 (TCP) | Default port |
Configuring VeloCloud SD-WAN
Login to VeloCloud Orchestrator (VCO) Console.
Navigate to Configure > Profiles .Â
The Configuration Profiles page appears
3. Select the Profile and then click on Device column.Â
The Device Settings page for the selected profile appears.
4. From the Configure Segment drop-down menu, select a profile segment.Â
By default, Global Segment [Regular] is selected
5. Go to the Syslog Settings area and configure the following :
a) From the Facility Code drop-down menu, select a Syslog standard value.
Allowed values are from local0 through local7.
b) Select the Syslog Enabled checkbox.
c) In the IP text box, enter the LCP IP address as the destination IP address of the Syslog collector.
d) From the Protocol drop-down menu, select either TCP or UDP as the Syslog protocol.
e) In the Port text box, enter the port number of the Syslog collector. The default value for UDP is 514 and for TCP is 601.
f) From the Roles drop-down menu, select the FIREWALL EVENT ,
g) From the Syslog Level drop-down menu, select the Syslog severity level that need to be configured.
h) In the Tag textbox - keep the tag value as velocloud.sdwan as it is the anchor field.
Note: Tag should not be blank and value should only be velocloud.sdwan.
i) Select the All Segments checkbox if you want the Syslog collector to receive firewall logs from all the segments.
Note: If the checkbox is disabled, the Syslog collector will receive firewall logs only from that particular Segment in which the collector is configured
LCP Configuration Parameters
Table 1-2: The VeloCloud SD_WAN event collector (Syslog - 3951) sensor properties to be configured by MDR are shown in the table.
Property | Default Value | Description |
Protocol | UDP | The default protocol for syslog. The collector can also accept logs in TCP. |
IP Address | Custom value | Logging device IP address mentioned in the Pre-Installation Questionnaire (PIQ). Note: If the device sends logs using multiple interfaces, contact the Accenture Security MDR onboarding team. |
Signatures | velocloud.sdwan | MDR recommended signatures processed by the VeloCloud SD-WAN event collector. |
Port Number | 514 | The default port number for syslog. For TCP, the default port is 601. Note: The LCP can be configured to listen on a non-standard port, please advise the Accenture Security MDR onboarding team if this is a requirement. |
Legal Notice
Copyright © 2021 Accenture. All rights reserved.
Accenture, the Accenture Logo, and DeepSight Intelligence are trademarks or registered trademarks of Accenture in the U.S. and other countries. Other names may be trademarks of their respective owners.
The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Accenture and its licensors, if any.
THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. ACCENTURE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.
The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12.212 and subject to restricted rights as defined in FAR Section 52.227-19 "Commercial Computer Software - Restricted Rights" and DFARS 227.7202, et seq. "Commercial Computer Software and Commercial Computer Software Documentation," as applicable, and any successor regulations, whether delivered by Accenture as on premises or hosted services. Any use, modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government shall be solely in accordance with the terms of this Agreement.