Accenture MDR Quick Start Guide for Poly Studio

Owned by KS
Last updated: Feb 23, 2022
2 min read

This quick start guide will help Accenture MDR customers configure Poly Studio to send logs to the Log collection Platform (LCP).

This document includes the following topics:

Supported Versions

A list of supported versions is available in the Accenture MDR Supported Products List document (Accenture_MDR_Supported_Products_List.xlsx) which can be found in Accenture MDR Portal.

Port Requirements

Table 1-1: Port requirements for LCP communication.

Source

Destination

Port

Description

Poly Studio

LCP

6514 (TCP - TLS)

Default port

Configuring Poly Studio

  1. Login to device console and navigate to Diagnostics.

  2. Navigate to Logs.

  3. Select log level as Critical.

  4. Enable the remote logging.

  5. Enter LCP IP Address as Remote Log Server Address.

  6. Select TLS from Remote Log Server Transport Protocol.

 

 

LCP Configuration Parameters

Table 1-2: The Poly Studio event collector (Syslog -3967) properties to be configured by Accenture are given in the table.

Property

Default Value

Description

Protocol                      

TLS

Device only support logs to be shared over TLS

IP  Address

*

Logging device IP address mentioned in the Pre-Installation Questionnaire (PIQ).

Note: If the device sends logs using multiple interfaces, contact the Accenture Security Onboarding team.

Signatures    

G_Series

Accenture Security recommended signatures processed by the Poly Studio event collector.

Port Number    

6514

Default port number for TLS.

 

 

Legal Notice

Copyright © 2021 Accenture. All rights reserved.

Accenture, the Accenture Logo, and DeepSight Intelligence are trademarks or registered trademarks of Accenture in the U.S. and other countries. Other names may be trademarks of their respective owners.

The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Accenture and its licensors, if any.

THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. ACCENTURE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.

The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12.212 and subject to restricted rights as defined in FAR Section 52.227-19 "Commercial Computer Software - Restricted Rights" and DFARS 227.7202, et seq. "Commercial Computer Software and Commercial Computer Software Documentation," as applicable, and any successor regulations, whether delivered by Accenture as on premises or hosted services. Any use, modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government shall be solely in accordance with the terms of this Agreement.