Accenture MDR Quick Start Guide for Third Brigade™ Deep Security
- Sekar Venkataramani
This quick start guide will help Accenture MDR customers configure Third Brigade™ Deep Security to send logs to the Log Collection Platform (LCP).
The document includes the following topics:
Supported Versions
Port Requirements
Configuring Third Brigade
LCP Configuration Parameters
Supported Versions
A list of supported versions is available in the Accenture MDR Supported Products List document (Accenture_MSS_Supported_Products_List.xlsx) which can be found in
Accenture MDR Portal - https://mss.accenture.com/PortalNextGen/Reports/Documents
Port Requirements
Table 1-1: Port requirements for LCP communication.
Source | Destination | Port | Description |
Third Brigade Deep Security | LCP | 514 (UDP) | Default port |
Configuring Third Brigade Deep Security
To configure Third Brigade Deep Security to forward event logs, follow the steps below.
Login to the Third Brigade Deep Security Manager console.
In the left pane, go to System > Settings.
On the Notifications tab, under Firewall and IPS Event Notification (from The Agents), check the Forward Firewall and IPS Events to remote host (via Syslog) check box.
In Firewall and IPS Event Notification (From The Agents) section, set the fields as follows.
Hostname or IP address of the host to which logs should be sent. | Specify the LCP IP address |
UDP port to which logs should be sent | Specify 514 |
Syslog Format | Specify Third Brigade Format |
5. In the System Event Notification (from The Manager) section, check the Forward System Events to a remote host (via Syslog) check box.
6. In the System Event Notification (from The Manager) section, set these fields as follows.
Hostname or IP address of the host to which logs should be sent | Specify the LCP IP address |
UDP port to which logs should be sent | Specify 514 |
Syslog Format | Specify Third Brigade Format |
7. Click Save.
LCP Configuration Parameters
Table 1-2: The Third Brigade Deep Security event collector properties to be configured by MDR are shown in the table.
Property | Default Value | Description |
Protocol | UDP | The default protocol for syslog. |
IP Address | Third Brigade Deep Security Interface IP address | Logging device IP address mentioned in the Pre-Installation Questionnaire (PIQ). Note: If the device sends logs using multiple interfaces, contact the Accenture Security MSS onboarding team. |
Port Number | 514 | The default port for UDP. |
Legal Notice
Copyright © 2021 Accenture. All rights reserved.
Accenture, the Accenture Logo, and DeepSight Intelligence are trademarks or registered trademarks of Accenture in the U.S. and other countries. Other names may be trademarks of their respective owners.
The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Accenture and its licensors, if any.
THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. ACCENTURE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.
The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12.212 and subject to restricted rights as defined in FAR Section 52.227-19 "Commercial Computer Software - Restricted Rights" and DFARS 227.7202, et seq. "Commercial Computer Software and Commercial Computer Software Documentation," as applicable, and any successor regulations, whether delivered by Accenture as on premises or hosted services. Any use, modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government shall be solely in accordance with the terms of this Agreement.