Accenture MDR Quick Start Guide for Symantec Endpoint Threat Defense for Active Directory (AD)
This quick start guide will help Accenture MDR customers configure Symantec Endpoint Threat Defense for AD devices to send logs to the Log collection Platform (LCP).
This document includes the following topics:
Ā
Supported Versions
A list of supported versions is available in the Accenture MDR Supported Products List document (Accenture_MSS_Supported_Products_List.xlsx) which can be found in Accenture MDR Portal - https://mss.accenture.com/PortalNextGen/Reports/Documents
Port Requirements
Table 1-1: Port requirements for LCP communication.
Source | Ā Destination | Ā Ā Ā Port | Ā Ā Description |
Symantec Endpoint Threat Defense for AD | LCP | 514 (UDP) or 601 (TCP) | Default port |
Ā Configuring Symantec Endpoint Threat Defense for AD Event
Log in to Web UI
Navigate to Settings > Notifications.
Enable SymETDAD Syslog Forwarding as ONĀ .
4. Once enabled, click Add Forwarding to configure Syslog options.
5. Configure the syslog options as below
Select UDP or TCPĀ from the Protocol dropdown box.
Enter the LCP IP Address in Syslog Server IP box.
Enter the PortĀ Ā in Syslog Server PortĀ box
Click Add Syslog to save the changes.
LCP Configuration Parameters
Table 1-2: The Symantec Endpoint Threat Defense for AD Event collector (Syslog - 3882) properties to be configured by MDR are given in the table.
Ā Property | Ā Ā Default Value | Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Description |
Protocol | UDP | The default protocol Ā for syslog.The collector can also accept logs inĀ TCP. Note: While TCP offers guaranteed delivery of log packets, it places a larger overhead on the LCP. To balance TCP for reliability over UDP for speed/simplicity, contact the Accenture Security MSS onboarding team. |
IP Ā Address | Symantec Endpoint Threat Defense for ADĀ interface IP address | Logging device IP address mentioned in the Pre-Installation Questionnaire (PIQ). Note: If the device sends logs using multiple interfaces, contact the Accenture Security MSS onboarding team. |
Port Number | 514 | The default port for UDP. For TCP, the default port is 601. Note: The LCP can be configured to listen on a non-standard port, please advise the Accenture Security MSS onboarding team if this is a requirement. |
SignaturesĀ Ā | Javelin: | MSS recommended signatures processed by the Symantec Endpoint Threat Defense for AD EventĀ collector. |
Ā
Legal Notice
Copyright Ā© 2021 Accenture. All rights reserved.
Accenture, the Accenture Logo, and DeepSight Intelligence are trademarks or registered trademarks of Accenture in the U.S. and other countries. Other names may be trademarks of their respective owners.
The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Accenture and its licensors, if any.
THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. ACCENTURE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.
The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12.212 and subject to restricted rights as defined in FAR Section 52.227-19 "Commercial Computer Software - Restricted Rights" and DFARS 227.7202, et seq. "Commercial Computer Software and Commercial Computer Software Documentation," as applicable, and any successor regulations, whether delivered by Accenture as on premises or hosted services. Any use, modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government shall be solely in accordance with the terms of this Agreement.