Accenture MDR Quick Start Guide for Sophos UTM
- KM (Unlicensed)
This quick start guide will help Accenture MDR customers configure Sophos UTM to send logs to the Log collection Platform (LCP).
Â
The document includes the following topics:
Supported Versions
A list of supported versions is available in the Accenture MDR Supported Products List document (Accenture_MDR_Supported_Products_List.xlsx) which can be found in
Accenture MDR Portal - https://mss.accenture.com/PortalNextGen/Reports/Documents
Port Requirements
Table 1-1: Port requirements for LCP communication.
Source | Destination | Port | Description |
Sophos UTMÂ | LCP | 514 (UDP) or 601 (TCP) | Default port |
Configuring Sophos UTM Point Product
To configure the Sophos UTM point product to send syslog events logs, follow the steps below.
Login to the Sophos UTM Web console as an Administrator.
From the left-bottom pane, go to Logging & Reporting > Log Settings. The Local Logging tab is enabled by default (Figure).
Go to the Remote Syslog Server tab and slide the button in front of it to enable the tab (Figure).
After enabling the tab, on the Remote syslog settings page, in the Syslog servers box, click the + (Add Syslog Server) icon or click the Edit icon to modify the Syslog Server settings.
In the Add Syslog Server box, specify Name, Server and Port information of the Syslog server or LCP. Then click the Save and Apply buttons.
In the Remote syslog buffer field, specify the default value as 1000.
In the Remote syslog log selection field, select the following feature logs to be sent to the remote Syslog server:
Advanced Threat Protection
Configuration Daemon
Firewall
Intrusion Prevention System
Local Logins
Logging Subsystem
System Messages
User Authentication Daemon
Web Filtering
8. Click Apply to save the changes.
LCP Configuration Parameters
Table 1-2: The Sophos UTMÂ event collector(Syslog-3751)properties to be configured by MDR are shown in the table.
Property | Default Value | Description |
Protocol | UDP | Default protocol for syslog events. |
IP Address | Sophos UTMÂ IP address | Logging device IP address mentioned in the Pre-Installation Questionnaire (PIQ). Note: If the device sends logs using multiple interfaces, contact the Accenture MDR onboarding team. |
Signatures | sys="SecureNet, sys="SecureWeb", sys="SecureMail", sys="System" | MDR recommended signatures processed by the Sophos UTM event collector. |
Port Number | 514 | The default port for syslog. |
Â
Â
Legal Notice
Copyright © 2021 Accenture. All rights reserved.
Accenture, the Accenture Logo, and DeepSight Intelligence are trademarks or registered trademarks of Accenture in the U.S. and other countries. Other names may be trademarks of their respective owners.
The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Accenture and its licensors, if any.
THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. ACCENTURE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.
The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12.212 and subject to restricted rights as defined in FAR Section 52.227-19 "Commercial Computer Software - Restricted Rights" and DFARS 227.7202, et seq. "Commercial Computer Software and Commercial Computer Software Documentation," as applicable, and any successor regulations, whether delivered by Accenture as on premises or hosted services. Any use, modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government shall be solely in accordance with the terms of this Agreement.