Accenture MDR Quick Start Guide for Tripwire® Enterprise
- Sekar Venkataramani
This quick start guide will help Accenture MDR customers configure Tripwire® Enterprise to send logs to the Log Collection Platform (LCP).
The document includes the following topics:
Supported Versions
A list of supported versions is available in the Accenture MDR Supported Products List document (Accenture_MDR_Supported_Products_List.xlsx) which can be found in
Accenture MDR Portal - https://mss.accenture.com/PortalNextGen/Reports/Documents
Port Requirements
Table 1-1: Port requirements for LCP communication.
Source | Destination | Port | Description |
Tripwire Enterprise | LCP | 601(TCP) | Default port |
Note: The Tripwire Enterprise point product forwards logs using TCP mode only. The LCP can collect logs in both TCP and UDP protocols if the logs are received through a syslog relay.
Configuring Tripwire Enterprise
To enable event logging to the LCP, follow the steps below.
Specify the Tripwire Enterprise Server address in the web browser. For instance, https://<ipaddress/hostname:port>
Login to the Tripwire Enterprise web console as an Administrator.
To edit the log management settings, click the SETTINGS tab on the top menu bar.
From the left pane, go to Tripwire > System and click the Log Management option.
5. On the Log Management Preferences page, you can configure Tripwire Enterprise to forward all new TE log messages through TCP to the LCP server by setting log management preferences as follows:
Table 1-2: Log Management Preferences
Field | Action |
Forward TE log messages to syslog | Select this check box and specify the following values: TCP host - The IP address or hostname of the LCP. TCP port - The port on which the log messages sent through TCP. To test the configuration, click the Test Connection button. |
6. Click Apply to save the changes.
LCP Configuration Parameters
Table 1-3: The Tripwire Enterprise event collector (Syslog - 3248) properties to be configured by MDR are shown in table.
Property | Default Value | Description |
Transport Protocol | TCP | Default protocol for syslog events. |
IP Address | Tripwire Enterprise IP address | Logging device IP address mentioned in the Pre-Installation Questionnaire (PIQ). Note: If the device sends logs using multiple interfaces, contact the Accenture Security MDR onboarding team. |
Port | 601 | The default port for syslog |
Legal Notice
Copyright © 2021 Accenture. All rights reserved.
Accenture, the Accenture Logo, and DeepSight Intelligence are trademarks or registered trademarks of Accenture in the U.S. and other countries. Other names may be trademarks of their respective owners.
The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Accenture and its licensors, if any.
THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. ACCENTURE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.
The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12.212 and subject to restricted rights as defined in FAR Section 52.227-19 "Commercial Computer Software - Restricted Rights" and DFARS 227.7202, et seq. "Commercial Computer Software and Commercial Computer Software Documentation," as applicable, and any successor regulations, whether delivered by Accenture as on premises or hosted services. Any use, modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government shall be solely in accordance with the terms of this Agreement.