Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

This quick start guide will help Accenture Security customers configure Illumio Adaptive Security platform to send log collection from the Log Collection Platform (LCP).

The document includes the following topics:

Supported Versions

A list of supported versions is available in the Accenture MDR Supported Products List document (Accenture_MDR_Supported_Products_List.xlsx) which can be found in

Accenture MDR Portal - https://mss.accenture.com/PortalNextGen/Reports/Documents

Port Requirements   

Table 1-1: Port requirements for LCP communication.     

Source

Destination

Port

Description

Illumio ASP

LCP

UDP / 514

or

TCP / 601

Default port and protocol

 Configuring Illumio Adaptive Security (ASP)

  1. In the Policy Console Engine (PCE) web console menu, navigate to Settings > Event Settings.

  2. Click Add.

    1. Event Settings – Add Event Forwarding page opens.

  3. Click Add Repository.

  4. In the Add Repository dialog:

    1. Enter name of the syslog server in Description field.

    2. Enter the IP address of the syslog server in Address field.

    3. Select UCP or TCP as a Protocol.

    4. Enter port number for the syslog server in Port field. (514 for UDP and 601 for TCP)

    5. Disabled the TLS now.

Note: Currently TLS is not supported for this onboarding and it may support in future.

5. Choose the events that needs to be forwarded.

6. Edit the event forwarding repository you have created.

7. Enable all in Auditable Events and Traffic Events like shown in below screenshot.

8. Click Save.

LCP Configuration parameters

Table 1-2: The Illumio Adaptive Security (3924 - Syslog) collector properties to be configured by MDR are shown in the table.

Property

Default Value

 Description

Protocol

UDP

The default protocol for syslog.

IP Address

Device IP Address

Logging device IP address mentioned in the Pre-Installation Questionnaire (PIQ).

Note: If the device sends logs using multiple interfaces, contact the Accenture Security MDR onboarding team.

Signatures

Illumio|PCE

MDR recommended signatures processed by the snort syslog event collector.

Port

514

The default port number for syslog. For TCP, the default port is 601.

Note: The LCP can be configured to listen on a non-standard port, please advise the Accenture Security MDR onboarding team if this is a requirement.

  • No labels

Legal Notice

Copyright © 2021 Accenture. All rights reserved.

Accenture, the Accenture Logo, and DeepSight Intelligence are trademarks or registered trademarks of Accenture in the U.S. and other countries. Other names may be trademarks of their respective owners.

The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Accenture and its licensors, if any.

THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. ACCENTURE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.

The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12.212 and subject to restricted rights as defined in FAR Section 52.227-19 "Commercial Computer Software - Restricted Rights" and DFARS 227.7202, et seq. "Commercial Computer Software and Commercial Computer Software Documentation," as applicable, and any successor regulations, whether delivered by Accenture as on premises or hosted services. Any use, modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government shall be solely in accordance with the terms of this Agreement.