Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

This quick start guide will help Accenture MDR customers configure Sniper IPS to send logs to the Log Collection Platform (LCP).

The document includes the following topics:

Supported Versions

A list of supported versions is available in the Accenture MDR Supported Products List document (Accenture_MDR_Supported_Products_List.xlsx) which can be found in

Accenture MDR Portal - https://mss.accenture.com/PortalNextGen/Reports/Documents

Port Requirements

Table 1-1: Port requirements for LCP communication.

Source

Destination

Port

Description

 Sniper IPS 

LCP

514 (UDP)

Default port

Configuring Sniper IPS

To configure Sniper IPS to send event logs, follow the steps below.

  1. Login to SNIPER IPS using admin credentials.

  2. Click the Preferences tab.

  3. Select Interworking.

  4. Click Add.

  5. In the Register the monitoring and controlling... dialog box, specify the following configuration information for the device:

  • Server IP Address - Type the LCP IP Address

  • Port - The default port value is 514 for UDP. You can provide any custom port value.

  • Sniper ID -  Type the Sniper ID

  • Interworking with control device - Select Syslog from the list.

 Note: Only UDP protocol is supported by the Sniper IPS. Sniper ID in the syslog configuration has to be only numeric characters and it should be unique for each individual Sniper IPS.

  6. Click Add.

LCP Configuration Parameters

Table 1-2: The Sniper IPS event collector(Syslog-3788) properties to be configured by MDR are shown in the table.

Property

Default Value

Description

Transport Protocol

UDP

This indicates what protocol is used by the sensor to communicate with the Sniper IPS.

Note: This collector does not support TCP and Syslog Director/Relay or Syslog Aggregator based environment due to device limitation.

IP Address

 Sniper IPS interface IP address

Logging device IP address mentioned in the Pre-Installation Questionnaire (PIQ).

Note: If the device sends logs using multiple interfaces, contact the Accenture MDR onboarding team.

Signatures

[SNIPER-

MDR recommended signatures processed by the Sniper IPS event collector.

Port

514

The default port for UDP. 

Note: The LCP can be configured to listen on a non-standard port, please advise the Accenture MDR onboarding team if this is a requirement.

 

 

  • No labels

Legal Notice

Copyright © 2021 Accenture. All rights reserved.

Accenture, the Accenture Logo, and DeepSight Intelligence are trademarks or registered trademarks of Accenture in the U.S. and other countries. Other names may be trademarks of their respective owners.

The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Accenture and its licensors, if any.

THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. ACCENTURE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.

The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12.212 and subject to restricted rights as defined in FAR Section 52.227-19 "Commercial Computer Software - Restricted Rights" and DFARS 227.7202, et seq. "Commercial Computer Software and Commercial Computer Software Documentation," as applicable, and any successor regulations, whether delivered by Accenture as on premises or hosted services. Any use, modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government shall be solely in accordance with the terms of this Agreement.