Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

This quick start guide will help Accenture MDR customers configure F5® BIG-IP Access Policy Manager® (APM) to send logs to the Log Collection Platform (LCP). 

The document includes the following topics:

Supported Versions

A list of supported versions is available in the Accenture MDR Supported Products List document (Accenture_MSS_Supported_Products_List.xlsx) which can be found in Accenture MDR Portal.

Port Requirements

Table 1-1: Port requirements for LCP communication.

Source

Destination

Port

Description

F5 BIG-IP APM

LCP

514 (UDP)

Default port

Configuring F5 BIG-IP APM

To configure the F5 BIG-IP APM to send syslog events, follow the steps below.

  1. Login the BIG-IP Configuration Utility portal with Administrator privileges.

  2. Go to Main > System > Logs > Configuration > Remote Logging.

  3. In the Properties section, provide the following details:

  • Remote IP - LCP_IP_Address

  • Remote Port - 514

4. Click Add.

5. Click Update to add the configuration.

Note: 

  • For logs coming from APM, only the BSD syslog format is supported.

  • For LTM along with APM deployment, remote syslog configuration is not required. Based on the signatures in the APM, the collector processes only APM logs.

  • The F5 BIG-IP APM event collector supports multi-threading logs from LTM 11.6 device.

 LCP Configuration Parameters

Table 1-2: The F5 Big IP(APM) event collector (Syslog -3781) properties to be configured by MSS are shown in the table.

Property

Default Value

Description

Protocol

UDP

The default protocol for syslog. F5 BIG-IP APM does not support TCP.

IP Address

F5 BIG-IP APM interface IP address

Logging device IP address mentioned in the Pre-Installation Questionnaire (PIQ).

Note: If the device sends logs using multiple interfaces, contact the Accenture MDR onboarding team.

Signatures

apd[,apmd[,tmm[,tmm1[,tmm2[,tmm3[,tmm4[,tmm5[,

tmm6[,tmm7[,tmm8[,websso.0[,websso.1[,websso.2[,

websso.3[, websso.4[,websso.5[,websso.6[,

websso.7[,websso.8[, dnscached[

MSS recommended signatures processed by the F5 BIG-IP APM event collector.

Port Number

514

The default port number for syslog.

Note: The LCP can be configured to listen on a non-standard port, please advise the Accenture MDR onboarding team if this is a requirement.

 

  • No labels

Legal Notice

Copyright © 2021 Accenture. All rights reserved.

Accenture, the Accenture Logo, and DeepSight Intelligence are trademarks or registered trademarks of Accenture in the U.S. and other countries. Other names may be trademarks of their respective owners.

The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Accenture and its licensors, if any.

THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. ACCENTURE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.

The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12.212 and subject to restricted rights as defined in FAR Section 52.227-19 "Commercial Computer Software - Restricted Rights" and DFARS 227.7202, et seq. "Commercial Computer Software and Commercial Computer Software Documentation," as applicable, and any successor regulations, whether delivered by Accenture as on premises or hosted services. Any use, modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government shall be solely in accordance with the terms of this Agreement.