Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

This quick start guide will help Accenture MDR customers configure TESS IDS to send logs to the Log Collection Platform (LCP).

The document includes the following topics:

  • Supported Versions

  • Port Requirements

  • Configuring TESS IDS

  • LCP Configuration Parameters

Supported Versions

A list of supported versions is available in the Accenture MDR Supported Products List document (Accenture_MSS_Supported_Products_List.xlsx) which can be found in

Accenture MSS Portal - https://mss.accenture.com/PortalNextGen/Reports/Documents

 Port Requirements

Table 1-1: Port requirements for LCP communication.

Source

Destination

Port

Description

TESS IDS

LCP

514 (UDP) or 

601 (TCP)

Default port

Configuring TESS IDS

To configure TESS IDS, follow the steps below.

  1. On the TESS IDS user interface, access System Configuration.

  2. Select Manager.

  3. Click Syslog Configuration.

  4. In the Syslog Configuration IP field, type the LCP IP address.

  5. Specify a port number.

  6. Check the check box next to information which you want to include in the syslog data: security log (with or without raw packet data) and/or system log.

  7. Save the configuration and exit the user interface.

LCP Configuration Parameters

Table 1-2: The TESS IDS event collector properties to be configured by MSS are shown in the table.

Property

Default Value

Description

Transport Protocol

UDP

Default protocol for syslog events. The collector can also accept logs in TCP.

Note: While TCP offers guaranteed delivery of log packets, it places a larger overhead on the LCP. To balance TCP for reliability over UDP for speed/simplicity, contact the Accenture Security MSS onboarding team.

IP Address

TESS IDS IP address

Logging device IP address mentioned in the Pre-Installation Questionnaire (PIQ).

Note: If the device sends logs using multiple interfaces, contact the Accenture Security MSS onboarding team.

Signatures

SigGroup, SigIndex, ManagerName,

Health, SensorName, 

TESS_GENERAL_Usage,EventLogSaveCnt

MSS recommended signatures processed by the TESS IDS event collector.

Port Number

514

The default port for UDP. For TCP, the default port is 601.

Note: The LCP can be configured to listen on a non-standard port, please advise the Accenture Security MSS onboarding team if this is a requirement.

  • No labels

Legal Notice

Copyright © 2021 Accenture. All rights reserved.

Accenture, the Accenture Logo, and DeepSight Intelligence are trademarks or registered trademarks of Accenture in the U.S. and other countries. Other names may be trademarks of their respective owners.

The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Accenture and its licensors, if any.

THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. ACCENTURE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.

The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12.212 and subject to restricted rights as defined in FAR Section 52.227-19 "Commercial Computer Software - Restricted Rights" and DFARS 227.7202, et seq. "Commercial Computer Software and Commercial Computer Software Documentation," as applicable, and any successor regulations, whether delivered by Accenture as on premises or hosted services. Any use, modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government shall be solely in accordance with the terms of this Agreement.