Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

This quick start guide will help Accenture MDR customers configure Symantec ICSP Neural USB Scanner to send logs to the Log collection Platform (LCP).

This document includes the following topics:

  • Supported Versions

  • Port Requirements

  • Configuring Symantec ICSP

  • LCP Configuration Parameters

Supported Versions

A list of supported versions is available in the Accenture MDR Supported Products List document (Accenture_MSS_Supported_Products_List.xlsx) which can be found in

Accenture MSS Portal - https://mss.accenture.com/PortalNextGen/Reports/Documents

Port Requirements

Table 1-1: Port requirements for LCP communication.

Source

Destination

Port

Description

Symantec ICSP

LCP

514 (UDP) or

601 (TCP)

Default port

 Configuring Symantec ICSP

  1. Log in to Web Interface

  2. Navigate to Events > Notifications

  3. Click Syslog

4. Enable the Enable Remote Syslog Messages

5. Enter the LCP IP address under Syslog Server Hostname

6. Enter the Destination port Type as UDP

7. Enter the Destination Port Number as 514

8. Select 18(local2) from the Log Drop-down menu

9. Select All Messages from the Message Type drop-down menu

10. Click on Save Configuration

LCP Configuration Parameters

Table 1-2: The Symantec ICSP event collector properties to be configured by MDR are given in the table.

Property

Default Value

Description

Protocol                      

UDP

The default protocol for syslog.

The collector can also accept logs in TCP.

Note: While TCP offers guaranteed delivery of log packets, it places a larger overhead on the LCP.

To balance TCP for reliability over UDP for speed/simplicity, contact the Accenture Security MSS onboarding team.

IP  Address

Any

Logging device IP address mentioned in the Pre-Installation Questionnaire (PIQ).

Note: If the device sends logs using multiple interfaces, contact the Accenture Security MSS onboarding team.

Signatures    

| Scan

MSS recommended signatures processed by the Symantec ICSP event collector.

Port Number    

514

The default port for UDP. For TCP, the default port is 601.

Note: The LCP can be configured to listen on a non-standard port, please advise the Accenture Security onboarding team if this is a requirement.

 

  • No labels

Legal Notice

Copyright © 2021 Accenture. All rights reserved.

Accenture, the Accenture Logo, and DeepSight Intelligence are trademarks or registered trademarks of Accenture in the U.S. and other countries. Other names may be trademarks of their respective owners.

The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Accenture and its licensors, if any.

THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. ACCENTURE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.

The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12.212 and subject to restricted rights as defined in FAR Section 52.227-19 "Commercial Computer Software - Restricted Rights" and DFARS 227.7202, et seq. "Commercial Computer Software and Commercial Computer Software Documentation," as applicable, and any successor regulations, whether delivered by Accenture as on premises or hosted services. Any use, modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government shall be solely in accordance with the terms of this Agreement.