Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

This quick start guide will help Accenture MDR customers configure HPE iLO to send logs to the Log collection Platform (LCP).

This document includes the following topics:

Supported Versions

A list of supported versions is available in the Accenture MDR Supported Products List document (Accenture_MDR_Supported_Products_List.xlsx) which can be found in Accenture MDR Portal.

Port Requirements

Table 1-1: Port requirements for LCP communication.

Source

Destination

Port

Description

HPE iLO

LCP

514 (UDP)

Default port

 

Configuring HPE iLO

Pre-Requisites -

  • An iLO License that supports this feature should be installed.

  • Logged User should have “Configure iLO Settings” privilege.

  • Authentication Failure Logging setting should be enabled to get Authentication Failed logs.

The Authentication Failure Logging setting allows you to configure logging criteria for failed
authentications and it should be enabled. Kindly find steps to enable and configure this.

  1. Login into iLO Web Interface.

  2. Click Security in the navigation tree, and then click the Access Settings tab.

  3. Update the Authentication Failure Logging by selecting Enabled-Every Failure setting.

  4. Click Apply.

Kindly follow below steps to allow iLO to send event notification messages to LCP.

  1. Login into iLO Web Interface.

  2. Click Management in the navigation tree, and then click the Remote Syslog tab.

  3. Set the Enable iLO Remote Syslog option to enabled.

  4. Enter the following information:
    • Remote Syslog Server - <LCP IP>
    • Remote Syslog Port - 514

  5. To send a test message to the configured syslog server, click Send Test Syslog.
    This button is available only when iLO Remote Syslog is enabled.

  6. To save the changes, click Apply.

LCP Configuration Parameters

Table 1-2: The HPE iLO event collector (Syslog -4002) properties to be configured by Accenture are given in the table.

Property

Default Value

Description

Protocol                      

UDP

The default protocol for syslog.

The collector can also accept logs in TCP.

Note: While TCP offers guaranteed delivery of log packets, it places a larger overhead on the LCP. To balance TCP for reliability over UDP for speed/simplicity, contact the  Accenture Security Onboarding team.

Host Names / IP Addresses

<DEVICE HOSTNAME or IP>

Provide Hostname or IP address of the device which forwards logs to the LCP

Signatures    

Port Number    

514

The default port for UDP. For TCP, the default port is 601.

Note: The LCP can be configured to listen on a non-standard port, please advise the Accenture Security Onboarding team if this is a requirement.

 

  • No labels

Legal Notice

Copyright © 2021 Accenture. All rights reserved.

Accenture, the Accenture Logo, and DeepSight Intelligence are trademarks or registered trademarks of Accenture in the U.S. and other countries. Other names may be trademarks of their respective owners.

The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Accenture and its licensors, if any.

THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. ACCENTURE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.

The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12.212 and subject to restricted rights as defined in FAR Section 52.227-19 "Commercial Computer Software - Restricted Rights" and DFARS 227.7202, et seq. "Commercial Computer Software and Commercial Computer Software Documentation," as applicable, and any successor regulations, whether delivered by Accenture as on premises or hosted services. Any use, modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government shall be solely in accordance with the terms of this Agreement.