Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 4 Next »

About the Device

SentinelOne EDR is an advanced EDR and threat hunting solution that delivers real-time visibility with contextualized, correlated insights accelerating triaging and root cause analysis. SentinelOne's remediation capabilities include quarantining infected files, blocking malicious network connections, and rolling back systems to a pre-attack state.

Device Information

 Entity

Particulars

Vendor Name

SentinelOne

Product Name

EDR (Endpoint Detection & Response)

Type of Device

Hosted

Collection Method

Log Type

 Ingestion label

Preferred Logging Protocol - Format

Log collection method

SentinelOne EDR

SENTINEL_EDR

Syslog - CEF2

CyberHub

Port Requirements

Source

Destination

Port

SentinelOne EDR

CyberHub

6514 (TCP)

To facilitate secure communication and align with our best practice, we strongly encourage the use of Transport Layer Security (TLS) between your security devices and our Adaptive MxDR platform for event forwarding.

While we understand that TLS support may not be available on all devices, if your devices do support TLS communication, we recommend utilizing port 6514 for seamless integration.

In some cases, the upgraded version of the device might incorporate TLS support without prior notice. If you come across such a scenario or for further assistance in configuring TLS, we kindly ask you to reach out to your dedicated Adaptive MxDR Service Delivery Lead.

Device Configuration

  1. In the SentinelOne management console, at the Account level, navigate to Settings > Notifications

  2. Under Notification Types, select All

  3. Select the Syslog checkbox for each type of Notification.

image-20240429-120614.png
  1. In Settings view, select Integrations.

  2. Under Types, select SYSLOG.

  3. Enable Syslog.

  4. In the Host field enter the CyberHub hostname and port 6514.

  5. Select Use TLS secure connection

    • If this is not selected, UDP is used by default. We recommend to use TLS.

  6. Under Formatting, select CEF2

image-20240429-120938.png
  1. Select TEST

  2. If the test passed, select SAVE

Integration Parameters

Parameters required from customer for Integration.

Property

Default Value

Description

IP Address

SentinelOne EDR interface IP address

Hostname or IP address of the device which forwards logs to the CyberHub

  • No labels