Page Comparison

...

1. Download and install the NXLog agent from the following location: https://nxlog.co/products/nxlog-community-edition/download.

2. Navigate to services.msc and stop the nxlog service.

3. Go to the folder "C:\Program Files\nxlog\data" and delete the file "configcache.dat" if it present.

4. Navigate to the installed location "C:\Program Files\nxlog\conf." Rename the attached

   View file
   name NXLog.conf

   file to "nxlog.conf" and copy it into this folder.

5. Replace the placeholder "CyberHub IP" with the actual CyberHub IP in the nxlog.conf file.

6. Copy the previously created certificate file on Windows machine where nxlog agent is installed and mentioned this cert path in nxlog.conf against "CAFile" on line number 5653.

7. Now, start the nxlog service from services.msc.

8. NXLog agent logs will be available at the location "C:\Program Files\nxlog\data\nxlog.log".

9. The log flow should work, and you can check it using tcpdump with the command "tcpdump -AA port 6514"

...